section-1

section-3

1. First, lay your WeatherBeeta blanket over your horse's back. If your horse has never worn a blanket before you may need someone to help hold them while you make adjustments.

2. Once you have ascertained that the blanket fits well around the neck, slide the blanket into position along your horse's back so that the coat lies flat. If the seam between the tail flap and the blanket sit below the top of the tail, the blanket may be too big. 

3. With blankets that feature leg straps, take the left leg strap, pass between the hind legs and fasten it on the left hand side:

1. take the right leg strap, pass it between the hind legs and through the loop made by the left strap and fasten to the right hand side.
2. The leg straps are links to prevent rubbing and act with each other to pull the blanket into place. If you fit the blanket well, it will displace very little through movement and rolling. If the leg straps are too loose, the blanket will slip.
3. Adjust the leg straps equally until there is room for the width of one hand (4-5") between the leg straps and the horse's thigh. This is to allow freedom of movement

4. Buckle the chest straps. It is essential that a blanket should fit well on the withers and shoulders so that your horse ccan move freely underneath the fabric without the blanket slipping back. Adjust the buckles and ensure you can still slide your hand down the neck of the blanket.

5. When fitting a blanket with cross surcingles care should be taken to ensure that the straps of the surcingle cross in the centre of the horse's belly - well forward of the horse's stifle. Again, there should be a hand's breadth between the straps and the horse's body.

section-5

To care for your blanket at home, follow the steps below:

• Remove excess dirt, mud and hair from the blanket
• Remove all detergent built up from your detergent dispenser
• Place the blanket in a mesh wash bag to contain all the straps and buckles and protect them
• Machine wash the blanket on a gentle delicate cycle using mild soap or a blanket cleaning wash such as Nikwac 'Rug Wash'. (Always follow the manufacturer's washing instructions)
• Do not use detergents or fabric conditioners as you risk compromising your WeatherBeeta unique waterproof and breathable coating
• For best results, re-proof your blanket to add durable water repellency and revitalise breathability. Use a blanket reproofer such as Nikwax 'Rug Proof'. (Always follow the manufacturer's proofing instructions)
• Line dry your WeatherBeeta blanket- do not tumble dry

section-2

Simple steps to select the right size coat:

1. Place a measuring tape at the base of the neck and measure along the spine and stop at the base of the tail.
2. The measurement in centimetres corresponds to the dog coat size, which are sized in 5cm increments. If your dog measures between sizes, size up if your dog is on the rounder or thicker side, and size down if they are thinner. 

section-4

1. Lay the WeatherBeeta coat along your dog's back
2. Slide it into the correct position on the dog
3. Firstly do up the belly strap to secure the coat around the dog's body (not too tight). It is essential that your dog's coat fits comfortably so they are able to still move freely and will be less likely to try and remove their coat.

section-6

To care for your dog coat at home

• Remove excess dirt, mud and hair from the coat
• Remove all detergent built up from your detergent dispenser
• Place the coat in a mesh wash bag to contain all straps and buckles, protecting them from being damaged and protecting your machine
• Machine wash the coat on a gentle delicate cycle (front loading washer), using mild soap or a reputable and recommended coat cleaning wash (always follow the manufacturer's washing instructions)
• Do not use detergents or fabric conditioners as you risk compromising your WeatherBeeta's unique waterproof and breathable coating (on select coats)
• For best results, re-proof your outdoor coat to add durable water repellency and revitalise breathability. Use a reputable and recommended coat proofer (always follow the manufacturer's proofing instructions)
• Line dry your WeatherBeeta coat - do not tumble dry.